Electric Bike Company strives to provide the best USA built electric cruiser in the world, by far, using local bike builders, highest quality parts, i...
V-O2 Cycling Saddles - Comfort IS Performance™! Introducing V-o2™ a NEW brand of cycling saddles. Created by riders for...
In 1817, a dapper young man wearing a top hat and tails was seen riding along a highway in southern Germany on a two-wheeled wooden vehicle. His name...
No nominations to this category
No nominations to this category
No nominations to this category
The Model Y is a step-through electric cruiser, built to order, 100% customizable, arrives fully built, has a range up to 40 miles, a max output of 1000 watts, a load capacity of 380 lbs, and a speed up to 25 mph. It is proudly built and assembled in the USA.
It is constructed with aircraft grade aluminum 6061 hydroformed frames and we increased the thickness of our frames from 1.5 mm to 3 mm in all crucial areas. We complete a 7 step process including painting, cleaning, base primer, 3 coats of paint, and 2 coats of clear sealant. A heat treatment gives extra strength and durability.
Our motor uses top quality neodymium magnets and quality copper windings ensure efficient, quiet, and high performing motor functions. The motor has a continuous output of 500 watts, while maximum output is 1000 watts.
We use certified, tested and internationally approved Samsung, Panasonic and LG cells for safety, reliability, range and life cycle.
We provide international battery exchange, maintenance and service due to our plug and play wiring system.
Easy plug and play wiring for ease of maintenance and replacement.
We have specified all our hardware and integrated bearings in our headsets and bottom brackets to be 100% stainless steel, rust resistance and corrosion free.
You cannot have a quality bike without a well-built high-quality bicycle wheel. For this reason, we build our wheels from scratch in our factory, under our strict control and management to ensure the highest quality result. We inspect, test and use the highest quality 13-gauge stainless, non-rust spokes and brass corrosion free nipples for both front and rear wheel construction. Our state-of-the-art wheel truing machine ensures perfect wheel alignment, truing and balancing.
The Model C is a classic style electric cruiser, built to order, 100% customizable, arrives fully built, has a range up to 100 miles, a max output of 1250 watts, a load capacity of 380 lbs, and a speed up to 28 mph. It is proudly built and assembled in the USA.
It is constructed with aircraft grade aluminum 6061 hydroformed frames and we increased the thickness of our frames from 1.5 mm to 3 mm in all crucial areas. We complete a 7 step process including painting, cleaning, base primer, 3 coats of paint, and 2 coats of clear sealant. A heat treatment gives extra strength and durability.
Our motor uses top quality neodymium magnets and quality copper windings ensure efficient, quiet, and high performing motor functions. The motor has a continuous output of 500 watts, while maximum output is 1250 watts.
We use certified, tested and internationally approved Samsung, Panasonic and LG cells for safety, reliability, range and life cycle. (See the Contact page for international safety certificates and testing approvals.)
The patent-pending, internal charger with retractable cord means you never have to worry about bringing a charger with you. The built-in fan keeps the battery cool and improves performance. An external, super-charging port is included for an optional rapid charger. A smart BMS is used for safety, performance, and longevity.
We provide international battery exchange, maintenance and service due to our plug and play wiring system.
Easy plug and play wiring for ease of maintenance and replacement.
We have specified all our hardware and integrated bearings in our headsets and bottom brackets to be 100% stainless steel, rust resistance and corrosion free.
You cannot have a quality bike without a well-built high-quality bicycle wheel. For this reason, we build our wheels from scratch in our factory, under our strict control and management to ensure the highest quality result. We inspect, test and use the highest quality 13-gauge stainless, non-rust spokes and brass corrosion free nipples for both front and rear wheel construction. Our state-of-the-art wheel truing machine ensures perfect wheel alignment, truing and balancing.
No nominations to this category
No nominations to this category
No nominations to this category
No nominations to this category
No nominations to this category
No nominations to this category
V-O2 Cycling Saddles - Comfort IS Performance™!
Our innovative patented V-Shaped cycling saddles are designed & engineered based on Body-Science Technology™. The new V-O2™ cycling saddles give riders a solution for cycling saddle pain, pressure, & discomfort problems.
How Does Your Cycling Saddle Handle The Pressure?
Learn more about our comparative pressure-mapping health & science studies at our website link below.
RideFast's Enduro/All-mountain riser bar is light enough for an XC bike, but thanks to our Ride Tuned carbon layup it's stiff enough for the most aggressive/demanding riding while also offering outstanding vibration damping for a precise yet comfortable ride.
No nominations to this category
No nominations to this category
The Wide Tire weapon. Evolved from the Hotline, our original Enduro/All-mountain Wheelset, to optimize footprint and performance of new-generation, large-volume tires. Backed by our lifetime guarantee.
No nominations to this category
ESI Grips are the original and ultimate 100% Silicone Grips that are made completely in the USA. ESI Grips are world-renowned and are chosen by cyclists everywhere. They offer superior comfort, shock absorption, control, a pop of color to match any bike and are extremely light weight. With various thicknesses and shapes, there is a grip for every rider's preference. As an essential contact point on your bike, ESI Grips are a perfect low-cost upgrade to give you the ultimate comfort and plush grip on your ride.
The Tube Cage Strap Mount - A gear strap for spare tube plus accessories in Slim Fit Design.
With many modern full-suspension bikes often remains only space to take a very small water bottle due to elaborate frame structures - which is not enough for a short tour. For those who want to use their bottle cage mount differently, there is now the Zine Sports Tube Cage Strap Mount, an extra lightweight accessory mount to elegantly stow a spare tube, tire lever and CO2 cartridge elegantly on the bike.
The Tube Cage retaining plate is optimized for the attachment of a tube plus accessories and is mounted to the bottle cage attachment to the frame. The retaining plate is shaped like a buckle, through the tension belt is guided. The Top Rails ensure that the tube fits tightly against the retaining plate. Due to the principle of buckle & top rails, the retaining plate can be slimmer than a conventional tube and is so barely visible (slim-fit design).
Advantages over other accessory holders:
Also known as the ‘Hell of the North’, Paris Roubaix is one of the oldest and most difficult one-day races with riders having to endure a daunting gauntlet of cobbled sectors before the finish in the Roubaix Velodrome. The upcoming 2020 edition amounts to 257 kilometres with 54.5 kilometres on pavé.
No nominations to this category
The RadBurro electric cargo trike is purpose built to meet the demands of business. Highly maneuverable and adaptable for a broad range of industries, the RadBurro features proprietary truck bed, cargo box, flat bed, and pedicab attachments, along with a 700-pound payload, powerful 750W motor, 80+ mile range, and motorcycle-grade components. An alternative to traditional work vehicles, the RadRunner helps enhance operational efficiency, improve fulfillment and delivery timelines, and reduce the cost and waste associated with other fulfillment methods.
No nominations to this category
No nominations to this category
No nominations to this category
No nominations to this category
No nominations to this category
Electric Bike Company's website has been redesigned to allow customers the ability to customize each bike order. During the build of each E-bike, customers can customize, colorize, accessorize, and stylize until their heart’s content. They will be able to view their own personalized E-bike through a high-res rendering before it is built.
Customers also have the ability to talk to a real live agent 7 days a week through Livechat to have all of their questions answered.
Electric Bike Company's online store offers a one stop store for all things Electric Bicycle. We offer a variety of accessories and parts to fit different styles of bikes and e-bikes, and we continually add new products.