tune (Germany) - Press Release: The Crosser Endurance Alu 700c have been developed for cyclo-cross use, gravel applications and for everybody looKINGkong for a lightweight, stable and resistant wheelset but also for a wheelset easy to maintain despite the mud, the rain, the snow…

With 24 D-Light SAPIM Spokes on the front and 28 on the rear coupled with 35mm profiled rim you will get a robust and stable wheelbuilt with a high lateral stiffness. Our Mig and Mag hubs equipped with double sealed Endurance bearings and with the reinforced Endurance freehub body are perfectly matching to get the lightweight and easy to maintain wheelset you are looking for. The rims are two times anodized with lasered logos. Brake surfaces are also full black anodised, in order to keep the surface colour quality of the brake surface, it is important that you use the recommended brake pads and to get them well adjusted. As time goes by the brake surface gets back to its normal Aluminium grey colour.

Technical data front wheel:

• Weight: 0,719kg
• Hub Type: Mig 24 holes with Aluminium Endcaps and Endurance bearings
• Spokes: SAPIM D-Light Butted Black Spokes
• Max Spoke Tension: 1100N
• Rim Inner Width: 19,9mm
• Rim Outer Width: 24mm
• Rim Height: 35mm
• Rim standard: 700c clincher, 700c x 24mm, 622x19,9mm
• Tubeless Ready: Yes
• Recommended Width Tubeless Tape: 22mm
• Recommended Length Tubeless Valve: 60mm
• Tyres and max. pressure: 25mm/7bar-28mm/6,5bar-33mm/5bar-45mm/3,5bar
• ERD (measured for Tune´s Spoke Simulator): 568mm
• Axle type: 5x100mm
• Nipples: SAPIM Anodized, double square, Polyax, Secure Lock, 16mm
• Recommanded brake pads: SwissStop BXP

Technical data rear wheel:

• Weight: 0,844kg
• Hub Type: Mag 24 holes with Aluminium Endcaps and Endurance bearings
• Spokes: SAPIM D-Light Butted Black Spokes
• Max Spoke Tension: 1100N
• Rim Inner Width: 19,9mm
• Rim Outer Width: 24mm
• Rim Height: 35mm
• Rim standard: 700c clincher, 700cX24mm, 622X19,9mm
• Tubeless Ready: Yes
• Recommended Width Tubeless Tape: 22mm
• Recommended Length Tubeless Valve: 60mm
• Tyres and max. pressure: 25mm/7bar-28mm/6,5bar-33mm/5bar-45mm/3,5bar
• ERD (measured for Tune´s Spoke Simulator): 568mm
• Axle type: 5X130mm
• Nipples: SAPIM Anodized, double square, Polyax, Secure Lock, 16mm
• Freewheel types: reinforced 3Teeth Titanium Technology Endurance
• Freewheel standard: available with XD/XDR, Shimano HG11, Shimano HG10 and Campa
• Recommanded brake pads: SwissStop BXP